110XL

Photos

The Barko 110XL Loader delivers high payload at a low total cost of operation. Equipped with standard features that set it apart from the competition, the 110XL lasts longer and works harder to deliver the results you demand.

DOWNLOAD SPEC SHEET

FEATURES SPECIFICATIONS OPTIONS

FEATURES -

Power Source

The 110XL is powered by a customer-supplied PTO.

Boom Construction

Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.

Dedicated Swing Motor

A triple gear pump produces up to 62 gallons per minute, with one pump section dedicated to the planetary swing drive that allows simultaneous operation of the boom and swing system without losing flow.

360-Degree Rotation

Rotary manifold allows for 360-degree continuous boom rotation and provides electrical and hydraulic power to the lower frame.

Hydraulic Valves

Sectional control type valves come with folding mechanical joysticks.

Cylinders

Features hydraulic cylinders with spherical bearings and heavy wall honed steel tubing. Heat treated cylinder rods have heavy chrome plating.

Operator Platform

Comfortable operator platform includes a locking, fold-down seat with armrests. The rotating platform includes beneath-the-seat style valve mounting and foot swing pedal.

Standard Accessories

Loader is equipped with load securing posts and dual ladders with non-slip treading. Other standard features include a house lock safety pin and mounting hardware.

Stabilizers

Telescopic stabilizers, controlled from the platform or the ground, help keep loads steady.

SPECIFICATIONS +

DIMENSIONS -

A-Frame Width	25.625" (65 cm)
A-Frame Height	5' 3" (158 cm)
Stabilizer Width	10' 3" (312 cm)
Total Operating Weight	6,120 lbs (2,776 kg) loader with cylinders (excluding grapple and options)
Additional Dimensions	Download spec sheet for additional product dimensions

TRAILER/TRUCK MOUNT +

Stabilizers	Telescopic stabilizers with 43" (109 cm) stroke cylinders

POWER +

Source	Customer supplied power take-off

HYDRAULICS +

Pump	Triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1,600 RPM
Operating Pressure	3,200 psi (220 bar) main system
Valves	Sectional control type with folding mechanical joysticks
Features	Heavy-wall tubing with high pressure hoses; independent swing system with direct-linked foot controls, rotary manifold to allow continuous rotation

BOOM +

Structure	Fabricated box style design with all welded construction and wear plates; bronze bushing with grease grooves at boom pivot points
Standard Boom	29' (884 cm)
Horizontal Reach	28' 5" (866 cm)
Cylinder Features	Hydraulic cylinders with spherical bearings; heavy wall honed steel tubing; heat-treated cylinder rods with heavy chrome plating
Maximum Front Lift Capacity (29' Boom)	3,110 lbs (1,411 kg) with 5' (1.5 m) radius 12,100 lbs (5,488 kg) with 10' (3.0 m) radius 8,100 lbs (3,674 kg) with 15' (4.6 m) radius 6,050 lbs (2,774 kg) with 20' (6.1 m) radius 4,810 lbs (2,182 kg) with 25' (7.6 m) radius 1,770 lbs (803 kg) at full reach

SWING SYSTEM +

Rotation	Continuous rotation on 27" (686 mm) external tooth turntable bearing; foot pedal control

OPTIONS +

Accessories

Spacers to accommodate various frame heights
Oil cooler kit with 12-volt fan
Left hand platform
45 gal. (170L) hydraulic tank with return line filters
Remote in-line hydraulic filter
LED boom lights (2)

Tracked Harvesters

Tracked Feller Bunchers

Tracked Processors

Truck & Trailer Mount Loaders

Tracked Loaders

Utility Loaders

Rough Terrain Carrier Loaders

Stationary Electric Loaders

Wheeled Feller Buncher

Strong-Arm Grapples

Industrial Wheeled Tractors