595B RTC

Return to Rough Terrain Carrier

Engineered for maximum dependability and productivity, the 595B RTC features an incredibly stable rigid frame, and boom options up to 40 feet, to propel your loading to a whole new level.

DOWNLOAD SPEC SHEET

FEATURES SPECIFICATIONS OPTIONS

FEATURES -

Rough Terrain Carrier Frame

The Rough Terrain Carrier is built with a rigid frame that provides far more stability than articulated carriers, allowing operators to maneuver safely without sacrificing performance.

Drawbar Pull

The RTC delivers extraordinary drawbar pull of 21,000 pounds, enough to pull a small log trailer, easily move through mud, and even climb steep grades of up to 45-percent.

Steering

4-wheel, 2-wheel and crab steering capabilities allow for effective maneuvering in tight spaces. With all four wheels maintaining ground contact to provide proper support, the RTC can easily navigate from pile to pile to maximize efficiency.

Turning Radius

Using 4-wheel-steer, the machine's 18-foot turning radius is sharper than many half-ton pickup trucks.

Speed

With ability to travel up to 12 mph in high gear, the RTC won't drain your productivity every time you have to move across the yard.

Stabilizers

Two sets of foldaway stabilizers further contribute to keeping loads steady.

Engine

The 595B is powered by a 173-HP Cummins QSB6.7 Tier 4 diesel engine with SCR aftertreatment.

Hydraulic Control System

The 595B features a pilot-operated control system, in conjunction with IQAN electronic controls, to provide a more natural feel for the operator. The system can be configured as necessary, and maintenance can be performed simply without a specialist.

Load Sensing Hydraulics

Unlike open loop systems that waste fuel, Barko's efficient load sensing system delivers power only when needed. Load sensing valves and pump deliver excellent metering by matching pressure and flow. Adaptable to most attachments, the system runs cool. Efficient and precise grapple functions reduce operator fatigue.

Joystick Controls

Multi-functional dual joystick controls are ergonomically designed to provide enhanced comfort and productivity.

Boom Construction

Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.

360-Degree Rotation

Rotary manifold allows for 360-degree continuous boom rotation and provides electrical and hydraulic power to the lower frame.

Swing Torque

Dual motors and planetary gearboxes produce 55,000 foot-pounds of swing torque, while improving machine balance.

Counterweight

Standard 7,000-pound cast steel counterweight provides extra stability.

Zinc Plated Pins

Extra large zinc plated pins and bolts provide added durability in high-stress areas.

Centralized Valves

Centralized hydraulic control valves are easily accessible outside cab door.

Bolt-On Cylinder Glands

Bolt-on cylinder glands make on-site service easy, while piston rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.

Service

Centralized turntable greasing system and removable service panels simplify maintenance tasks.

Operator Cab

Vibration-isolated "floating cab" provides a smoother ride. Weather sealed, insulated and climate controlled, the cab includes a suspension seat with armrests, foot swing controls, swing out entry door, front guard and halogen lights. Walk-up steps and a solid platform minimize the potential for slip-and-falls when entering the cab.

Instrument Panel

Digital display provides enhanced monitoring of all machine functions.

Windows

Tinted windows, including roof, rear and sliding side windows, provide 360-degree visibility for safer operation.

Fuel Tank

120-gallon (454 L) fuel tank capacity allows for longer operating intervals.

SPECIFICATIONS +

DIMENSIONS -

Overall Height	14' 2" (432 cm)
Overall Loader Length	45' 4" (1,260 cm) with 36’ boom extended & 7,000 lbs counterweight
Ground Penetration	7" (178 mm)
Ground Clearance	19" (48 cm)
Overall Width	9' 11" (302 cm)
Stabilizer Width	15' 11" (485 cm)
Stabilizer Spread	14' 1" (429 cm)
Tail Swing	9' 3" (282 cm) with 7,000 lbs counterweight
Wheel Base	14' 2" (432 cm)
Track	8' 4" (254 cm)
Approx. Operating Weight	50,000 lbs (22,680 kg) without attachment

ROUGH TERRAIN CARRIER +

Maximum Speed	12.0 mph (19.3 km/h) high gear, 3.4 mph (5.5 km/h) low gear
Tractive Effort	25,000 lbf (111.2 kN) low gear, 6,100 lbf (27.1 kN) high gear
Gradeability	45%
Brakes	Primary: Hydrostatic dynamic braking mechanism Secondary: Hydraulic disc brakes on all 4 wheels, operated by foot pedal Park: Spring applied hydraulic release (SAHR)
Axles	Planetary drive axles front and rear; front oscillates (with hydraulic oscillation lock), rear rigid to frame
Transmission	2-speed hydrostatic drive
Steering	Hydraulic 4-wheel steer; front axle controlled by joystick axis, rear axle controlled by buttons on joystick
Turning Radius	2-wheel steer: 36' (1,097 cm); 4-wheel steer: 18' (549 cm)
Tires	16.00 x 25 pneumatic

ENGINE +

Model/Power	173 HP (129 kW) Cummins QSB6.7 Tier 4 Final with SCR aftertreatment
DEF Tank	10 gal. (38 L)
Fuel Tank	120 gal. (454 L)

HYDRAULICS +

Tank	112 gal. (424 L) with return line filter, shut-off valve on pump suction line
Pump	119 GPM (450 LPM), variable displacement piston
Operating Pressure	3,600 psi (248 bar) main system
Features	Heavy-wall tubing and multi-wire braided hose; quick disconnect diagnostic ports

BOOM +

Structure	All-welded construction with fabricated box type design; aluminum bronze bushings with grease grooves at boom pivot points
Horizontal Reach	32' (975 cm)
Vertical Reach	38' 4" (1,168 cm)
Cylinder Features	Hydraulic cylinders with wear rings on pistons and bolt-on glands; heavy-duty steel tubing; induction hardened rods with heavy chrome plating; spherical bearings at all pivots
Main Boom Cylinder	7" x 51" (178 x 1,295 mm) with 4" (102 mm) rod
Stick Boom Cylinder	7" x 35" (178 x 889 mm) with 4" (102 mm) rod
Maximum Lift Capacity	38,820 lbs (17,608 kg)
Maximum Lift Capacity (36' Boom)	25,970 lbs (11,780 kg) with 12' (3.7 m) radius 29,260 lbs (13,272 kg) with 15' (4.6 m) radius 21,780 lbs (9,879 kg) with 20' (6.1 m) radius 17,260 lbs (7,829 kg) with 25' (7.6 m) radius 14,210 lbs (6,446 kg) with 30' (9.1 m) radius 7,790 lbs (3,533 kg) with 32' (9.8 m) radius

SWING SYSTEM +

Rotation/Swing Speed	Continuous on 54" (1,372 mm) internal tooth turntable bearing; 9 RPM, power transmitted through dual motors and planetary gearboxes
Swing Torque	55,000 ft-lbf (74,570 Nm); 100% theoretical
Braking	Hydrostatic dynamic braking with 73,000 ft-lbf (98,975 Nm) braking swing torque
Swing Brake	Spring applied hydraulic release (SAHR)

OPTIONS +

Counterweight

Optional 10,000-pound cast steel counterweight for larger loads

Attachments

Bar slasher hydraulics package
Log & pulp grapples
Grapple saw

Booms

32-foot straight or live heel boom
36-foot straight or live heel boom
40-foot straight boom

Cab Risers

23" or 42" hydraulic tilt cab riser
23", 36" or 48" fixed cab riser

Accessories

Boom lights
Detachable heel bar (standard or offset, single or double vee)
Engine block heater
Hydraulic tank heater
Hydraulic thermal bypass
Automatic greasing system
12-volt hydraulic transfer pump
Alternate hand/foot control configurations (consult factory)
Holding swing brake